![]() Click the “Custom” folder, then the “Stock” folder, and inside is your stock file. Navigate to the USB drive you have just inserted into your computer and open it. Simply remove the microSD card from the display, insert it into the SD card adapter and inster it into the USB drive on your computer. Once you have pulled the stock file from the tuner in your truck, it’s time to send the file to us. ![]() The two most common problems with getting the stock file are either not securly connecting the USB or the microSD card is not fully inserted. Finally, press “Exit”, then get ready to email us the file. After pressing this, it should say “successful”. Go to the main menu and select ECM, then hit ECM again, then select “Get stock file for truck”. Once everything is connected, turn on your truck to make sure things are working and powering on. The remaining ports are for accessories, such as an EGT gauge. Lastly, connect the micro USB cable from the com box to the monitor. Connect the shift on the fly wire (be careful, it can be delicate) to the com box, then connect the OBDii wire on the oposite side. Next, we suggest removing the kick panel so you can install the com box and connect the shift on the fly wiring. The wire then needs to be routed into the cab of the truck. Remove the ziptie and dummy plug, then connect the shift on the fly wire. It is ziptied to a wire harness and has a dummy plug in place. On 3rd gen and up, the shift on the fly is located between the fuel rail and master cylinder. This should be everything you need to install MM3 on your truck. The box includes:ĭata Port Plug for Shift on the Fly – This is year specific. When you order an MM3 tuner through us, you’re going to get everything you need to install the tuner and control for your truck.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |